Broan 655 BROAN-NUTONE 655 HEATER/FAN/LIGHT WHITE PLASTIC GRILLE 70 CFM

BROAN-NUTONE 655 HEATER/FAN/LIGHT WHITE PLASTIC GRILLE 70 CFM

SKU: 283972

4.0

Manufacturer Image

shopping_cart_off We're sorry, this product is not available for purchase right now.

Product Details

Manufacturer:	Broan
Mpn #	655
Shipping Dimensions	1.0" x 1.6" x 0.8"
Weight	13.96 lbs.

About the Broan 655

Product Features

Reviews

jeffrey s.

Originally posted on plumbersstock.com September 05, 2020

Jerry

is excellent, the only thing I can fault is that it is very noisy when on exaust

Originally posted on broan.com September 05, 2020

seeker

Would be nice to have a night lite feature. Regular Light bulb expired in 2 months-probably no ventilation around it

Originally posted on broan.com September 05, 2020

tszig2004

It was a little harder to install because we were replacing an old fan, so I had to do a lot of rewiring and drywalling.

Originally posted on broan.com September 05, 2020

DAVE58

THIS WAS A REPLACEMENT FOR AN EXISTING UNIT THAT HAD GOT TIRED, THE INSTALLATION WAS EASY AND WENT IN WITHOUT A PROBLEM.

Originally posted on broan.com September 05, 2020

mlfb

It works great, is so nice to have extra warmth in the bathroom in the winter! The only negative is that it's rather noisy.

Originally posted on broan.com September 05, 2020

StudebakerJoe

I replaced both of the fans in my upstairs bathrooms with Broan 655 heat/light/fan and I am pleased. These are a little noisy but most fans are. The price was very reasonable and the quality is great.

Originally posted on broan.com September 05, 2020

Marty

The 655 works fine but the light socket failed within 1.5 years and the light lens has yellowed from a 100W bulb during normal residential use. As a specifier of fans in the HVAC industry I give it a 5 out of 10 for short light socket life.

Originally posted on broan.com September 05, 2020

DUDE64

THIS UNIT DOES A VERY GOOD JOB IN ALL ASPECTS. THE ONLY THING I DO NOT LIKE ABOUT IT IS HOW LOUD IT IS WHEN IT IS IN THE HEATING MODE. STARTING UP IT RATTLES THE PICTURES ON THE WALLS.... IMAGINE HAVING A CROP DUSTER CRANKING UP IT'S ENGINE IN YOUR BATHROOM!!

Originally posted on broan.com September 05, 2020

bob654321

I am on my fourth heater unit and second fan motor since purchasing this unit 3 years ago. Plan on replacing something at least once a year if you own one of these. These units gradually gets noisier and louder till it is unbearable in just a few months of use. I took one of the heater motors apart to see why it failed.. The motor bearing on the side to the squirrel cage fan had become so loose from the constant vibration that it would spin around with the motor shaft and it no longer offered any support to the squirrel cage fan that was free to wobble to the point that the armature of the motor would rub and cause the motor to slow down. Since it cost almost as much for a replacement heater motor as a new complete unit I am now looking to buy a third new unit for spare parts. Once you install one of these you are looking at a major job to remove it and go with a better unit, so I would recommend that you pay the extra and get a good one to start with! I wish I could give a zero stat or even a minus star for this product.

Originally posted on broan.com September 05, 2020

Resources

Question and Answer