Saniflo 011 Sanipack Macerator Pump for In-Wall Tank System
SKU: 235782
This product is not currently available for purchase.
About the Saniflo 011
About the Saniflo 011 Sanipack Macerator Pump for In-Wall Tank System
011 SANIFLO SANIFLO SANIPACK MACERATING PUMP FOR IN WALL FRAME SYSTEM
Product Details
Manufacturer:
Saniflo
Mount Type:
In-wall
Mpn #
011
Weight
17.00 lbs.
Product Features
A 1/2 HP pump system.
Uses 10 V – 60 Hz / 4.5 Amps (Max).
Has a 0.5 HP oil-filled thermally protected motor.
With 45 microfarad capacitor rating.
Operating Temperature is 104 F° (110 F° Max).
Power cord length: 48 inches.
At 53 dBA (Lp) (measured at 3 feet) noise level.
Can install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack
Incorporates a macerating system which can handle human waste and toilet paper in residential applications.
The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.
Discharges the waste through a 3⁄4 inch or 1 inch rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system.
This elbow can be rotated 360 degrees depending on the discharge installation.
Has been designed with a 1-1⁄2 inches vent connection on the top of the lid.
This pump is designed to be connected to any wall-hung toilet with a minimum of 1⁄4 inch per foot gravity fall on the waste pipe coming from the toilet into the pump.
Will also discharge gray water from any sink, shower or urinal. The wastewater will drain into the system via two 1-1⁄2 inches inlets with built-in check valves on either side of the housing.
Requires two way vent connection
Dimensions 11
3/4
13 Gallon Per Minute Discharge rate at 9 feet rise